Alignment View
When you are viewing alignments you can view the following in the Plan View:
Earthworks
Stationing/chainage markers
Link Bar
Hide and show Horizontal IP
Hide and show Vertical IP
Additional views or windows are also available in the Scenario View:
Profile view
Cross-Section window
Alignment Properties
Profile View
The Profile view displays the profile view of the alignment. It is available when you are viewing alignments. To view the alignment in profile, do one of the following:
From the Evaluation menu, select Profile View.
From the Alignment Toolbar select the icon.
The Profile view appears:
Tip: Select two alignments to compare their profiles. Two profile views will appear.
Note: You can zoom in to the Profile view providing V:H Ratio in the Alignment tab, Preference settings dialog is not set to Auto.
Mass Haul displays the movement of earthworks.
To view the Mass Haul in the Profile window do one of the following:
From the Evaluation menu, select Mass Haul.
From the Alignment Toolbar, select the icon.
The Mass Haul diagram appears. See Earthmoving.
Cross-Section View
The Cross-Section view displays the cross-section of the alignment at the selected chainage/stationing. It is available when you are viewing alignments.
To view the Cross-Section View, do one of the following:
From the Evaluation menu, select Cross-Section.
From the Alignment Toolbar, select the icon.
The Cross-Section window appears. This window can be moved around the Scenario View.
Alignment Properties
The Alignment Properties window displays information on the currently selected alignment.
To view the Alignment Properties window, do one of the following:
From the Evaluation menu, select Alignment Properties.
From the Alignment Toolbar, select the icon.
The Alignment Properties window appears. See Alignment Properties.
